4/0 Steel Main Gear

[Rivverrat]

 Anyone have a 4/0 steel main gear ? ... Jeff

[Darin Crofton]

I have one that came out of one of my pro gears, I believe it's steel? I'll have to clean it and let you know...

[Darin Crofton]

It looks like steel to me and I just read that they came with steel gears, 4:1 ratio, I'll send you one if you need it, I have three of them?

[Maxed Out]

Darin, stock 113h gears are 3.25/1 ratio

Aftermarket gear sets are 4/1

[Rivverrat]

Yup it's 3.25:1 steel gear I'm after. This is a very nice ratio for these reels... Jeff

[steelfish]

Jeff,

I think I have one, let me check my box of spare parts if its a Steel one and not the normal one, I will let you know in few hours
if Its the one you want, its yours N/C.

[Rivverrat]

Alex thanks for checking... Jeff

[Bryan Young]

Just to be clear...113 or 113H? 

[steelfish]

Just to be clear...113 or 113H? 

Considering he just built a T4N1 kit (113HXN) pretty much he's looking for a steel main gear for that reel.

[Rivverrat]

Yup

[Ron Jones]

I can't tell you how much I want to build a slow T4NX (Grouper narrow?) Just to watch everyone's head explode. I know the pinion won't fit, but what fun!
Ron

[steelfish]

Alex thanks for checking... Jeff

Lucky guy Sr. "Rata de Río"

I found it, let me know if you need the pinion too or just the main gear.
PM me your addy compadre

[Rivverrat]

What do you need for both I don't want to separate a main gear & pinion that have been used together... Jeff

[steelfish]

What do you need for both .... Jeff

Just your address amigo.

And later you posting a Picture of you with a monster Catfish on the T4NX

[Rivverrat]

What do you need for both .... Jeff

Just your address amigo.

And later you posting a Picture of you with a monster Catfish on the T4NX

All righty I can do that... Jeff