model ID help

Started by elcarlstono, December 06, 2018, 08:40:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

oc1

Don't see how it could have been tapped at an angle.  Could handle arm be bent?  That's not hard to do.
-steve

George6308

I agree with OC1 could be bent or is there play in the knob shaft causing the wobble? They do get loose if not oiled. If play is found you might try injecting heavy grease via the oiler into the shaft as a temporary fix. Or just replace the whole handle  with a power knob or a flat knob. Both types are available.
The tap size  is 1/4-28 Left Hand if you just want to try retapping the handle.