Shimano 200 baitcaster

[publius]

Need to know how to remove the sideplate on a 200 baitcaster. Round silver plain 200, no suffix. Looks like it should just knock out but not happening. Bigger hammer? it is old and dirty.

[RowdyW]

Some spinners need the rotor removed first. I'm not sure on that one though.     Rudy

[Zimbass]

Hi publius,

You need to undo the 2 right side plate bolts, (they are knurled). Then remove the side plate, and spool.

The left side is held in place by 2 screws either side of the bearing holder. Sometimes you need to place something through the screw hole to push out the left side plate.

Cheers,

Terry.