Mag 10 Clamping Stand Conversion

Started by xjchad, February 21, 2020, 07:02:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


I've done a few of these now and Randy Dorcy has reeally put them to the test.
Using a Penn 10-49 stand to add provisions for a clamp.
One spacer for each side of the clamp.  The side plates and rings are drilled to 1/8" and then counterbored for using larger 5-40 stainless screws.

Husband, Father, Fisherman