alan tani @ alantani.com fishing reel repair rebuild tutorial Servicing a Roller clutch bearing
Reel Repair by Alan Tani
September 15, 2019, 06:09:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Servicing a Roller clutch bearing  (Read 4564 times)
0 Members and 1 Guest are viewing this topic.
coastalobsession
Member
*
Offline Offline

Posts: 183


« on: December 21, 2011, 08:38:35 AM »

Heres a Tutorial On how to service a Roller clutch bearing. Pt number 1207. Over all it is pretty easy and worth the small effort and time.


First take the RCB out of the reel

Next Find a real small regular screw driver (eye glass screw driver will work) and find the small lip and slowly pry it out.

Once you have it out then you can get a soft tooth brush and simple green and softly brush away the old oil/sand and grease



After brushing the grease off on the cage (blue part) and the housing then you can wipe the excess off carefully with a q tip. Then make sure there are no cotton fiber strands from the q tip on either part.


Now you can put the individual metal cylinder back in to the cage

Once finished then you can slowly place the housing back onto the cage and slowly press down. Notice in the first photo that there are groves in the cage and housing, make sure those line up


Once that is done then you can spray some corrosion x in to the RCB and let the excess drain out

Now you can insert it back into the reel.
Logged

Coastal Obsession Deckhand and reel cleaning
Snagged2
Firearms Group
Member
**
Offline Offline

Posts: 159



« Reply #1 on: December 21, 2011, 10:42:25 AM »

Interesting,Thanks,,

Looks like the white bearing carrier is directional.. If assembled incorrectly, would the bearing work backwards? or not at all...?
Logged
coastalobsession
Member
*
Offline Offline

Posts: 183


« Reply #2 on: December 21, 2011, 05:29:06 PM »

It would the cage would not fit in backwards
Logged

Coastal Obsession Deckhand and reel cleaning
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 10219


The Reel Whisperer


« Reply #3 on: December 22, 2011, 05:50:21 AM »

Very nice.  Those little roller disappear easily.  Keep an eye and count on those bearing.
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
Nessie Hunter
Firearms Group
Member
**
Offline Offline

Posts: 972


Hesperia, Ca 92345


« Reply #4 on: December 22, 2011, 12:30:19 PM »

Most of the One Way roller bearings I have seen or work on have TINY little springs that are impossible (for me) to get back in....

I have never seen one like that.....  What is it out of???

They are to cheap to mess with IMHO...   But good to know, thanks..
Logged

"Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....
WOW!!! WHAT A RIDE!
coastalobsession
Member
*
Offline Offline

Posts: 183


« Reply #5 on: December 22, 2011, 03:12:04 PM »

A shimano curado cu200
Logged

Coastal Obsession Deckhand and reel cleaning
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.195 seconds with 19 queries.