bearing sizes by reel - a running list

[erikpowell]

Beastmaster 20/50 2 speed


7x14x5 spool bearings x2   

7x17x5 Lt spool bearing

9x20x6 Rt side plate/pinion

sorry, no part #'s available... schematics don't seem to exist for this reel...if anyone knows where to find them please let me know
so I can file it away.
Thanks
Erik

[Gxnefishing]

Erik This may be what your looking for...
http://schematics.planetseafishing.com/downloads/shimano/multiplier/triton-series/triton-beastmaster-graphite-2-spd-20-50(90-33).pdf

[erikpowell]

Thanks ! 

[erikpowell]

Tiagra 30WLRS

Here's an easy one... all 4 bearings are the same size !!
spool x2 , left side & rt side pinion

4 @  7x19x6

[erikpowell]

Shimano Torsa 30

2 ea 10x19x5  inner/outer - handle

9x20x6  Pinion

2 ea 7x14x5 spool
1 ea 7x17x5 spool

[erikpowell]

Tiagra 50W
4 bearings, all same
shimano part # TT0033 -  8x22x7


Tiagra 50WLRSA
4 bearings, all same
shimano part # TT0576 -  8x22x7

Tiagra 80W
4 bearings all same
shimano part # TT0033 - 8x22x7

Tiagra 80WA
4 bearings all same
shimano part # TT0576 - 8x22x7

[alantani]

avet mxl 5.8:1

sn#mxl5.8r-11502



Left spool - 0.1875 x 0.500 x 0.196 - sr3-zz #3 $7

Right spool - 0.1875 x 0.3125 x 0.125 - sr156-zz  #7 $8

Pressure plate - 0.1875 c 0.375 x 0.125 - sr166-zz #7 $8

Drive shaft (two bearings) - 8 x 16 x 5 smr688-zz #5 $9

Right main side plate - 0.250 x 0.625 x 0.196 sr4-zz #3 $8

[outsiderskip]

 tyros 16 sizes
7x17x5
9x17x5
7x13x4
pete

[alantani]

progear classic series 500, 501, 550 and 551

left spool - 0.125 x 0.375 x 0.156
right spool - 6 x 12 x 4

[NAD97]

Well I thought Id start off by contributing with something
12 Ultegra 3000HG      B   D   W   NO.
Main gear bearing         7   11   3   MR117ZZS
Main gear bearing         7   13   4   MR137ZZS
Pinion gear top bearing      7   14   5   MR687ZZ
Pinion gear bottom bearing      5   8   2.5   MR85ZZS
Line roller bearing         4   7   2.5   MR74ZZS

"https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21294&authkey=AHPVj-WaC8xRyE8&em=2" width="476" height="288" frameborder="0" scrolling="no"

Sustain 5000FE
Main gear bearing x 2      7   13   4   MR137ZZS
Pinion gear bearing      7   14   5   MR687ZZ
Line roller bearing         5   9   3   MR95-2T
Drag spool bearing         7   11   3   MR117ZZS
Handle Bearing out      4   7   2.5    MR74ZZS
Handle Bearing in         5   8   2.5   MR85ZZS

https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21292&authkey=AN7Kik8BJ1f5MRg&em=2" width="476" height="288" frameborder="0" scrolling="no"

Tyrnos 8II
Main Gear bearing x 2      7   17   5   MR697ZZS
Spool bearing   x 2      7   13   4   MR137ZZS

https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21293&authkey=AJPflwRi-vceF3Y&em=2" width="476" height="288" frameborder="0" scrolling="no"

The links below each one are to the reel schematics

[erikpowell]

Diawa Team Advantage 153HSTL

handle bearing          8 x 12 x 2.5

Lt spool cap bearing   5 x 8 x 2.5

pinion bearing          8 x 12 x 3.5

[MFB]

Daiwa 900H

694ZZ
10mm x 20mm x 5mm

Regards

Mark

[SHAWNFISH]

Abu 6501-C3 Older Model
                                      Qty
Spool Bearings 4 X 10 X 4       2
Pinion Bearing  8 X 13 X 4       1

im curious, by pinion bearing do you mean the bearing above the drag/drive gear before there was a IAR bearing?

[Tightlines667]

Shimano Beastmaster 50/80

3 of 8X22X7 (TT0576)
2 of 8X6X19 (RD8128)

Also,
Bellevilles are RD8341

[Unutt]

And another

Ambassadeur ProMax / BlackMax 1600/3600

Spool (2)    3x10x4
Worm (2)    3x7x3
IAR (1)       HF1012 (10mm ID, 12mm wide)  reel foot 020002 or 020003
or
IAR (1)       HF1008 (10mm ID, 8mm wide)  reel foot 020103 or higher

Note:  HF1008 actually works great in either application.