Fin-Nor Trolling Reels Drag Replacement

Started by Capt Drew, May 19, 2022, 12:31:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Capt Drew

I previously had email correspondence back and forth about ten or twelve years ago but have since lost all those emails.  We communicated back and forth regarding the December 7, 2008 post where you discuss the Loctite 330.  At that time you decided the Loctite 330 was the best available for drag replacement on the Fin-Nor reels.  So now that it is fourteen years later, in your opinion, is the Loctite 330 still the best that you have found for drag replacement?

Where can I buy this and do they sell it in a smaller quantity?

Also, I see some posts regarding using epoxy.  Your thoughts?

alantani

loctite depend 330 is still probably the best. 
send me an email at alantani@yahoo.com for questions!

Robert Janssen

#2
More info on the subject, since it was discussed previously in these threads.
Depending on the details of the application, Loctite 330 may not be the best. You do what you like of course, but I myself would absolutely not use it for bonding CF friction material.

https://alantani.com/index.php?topic=22795.msg255059#msg255059

https://alantani.com/index.php?topic=8892.msg79187#msg79187

.