Penn Spinfisher 650SS

Started by nicky.phil, May 15, 2009, 02:31:54 AM

Previous topic - Next topic

Taily and 1 Guest are viewing this topic.

nicky.phil

Hi Alan, after reading your post on how to improve the drags of my Penn Spinfisher I am trying to change my 650SS and 550SS Thrust washer ( teflon ) part no. # 60 750 and # 60 550 to HT-100 hoping to get more drag on my reels.  do you have the part no. for the HT-100 replacement? many Thanks :) :) :)

Nicky from Manila, Philippines

alantani

nick, measure out the teflon washers and match them up with something on this list.  let me know if you have trouble finding a match, but it should be there.  it will most likely be a #6-60.  alan

http://alantani.com/index.php?topic=21.0
send me an email at alantani@yahoo.com for questions!

nicky.phil

Hi Alan, thank you very much for the info. after changing the Teflon washers I was able to get 14 lbs of drag from my reel. again many thanks. Nicky :) :) :)

alantani

send me an email at alantani@yahoo.com for questions!