alan tani @ alantani.com fishing reel repair rebuild tutorial Tutorial: Garcia Mitchell 3-0-0 Spinning Reel Service
Reel Repair by Alan Tani
February 17, 2020, 10:28:43 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2] 3   Go Down
  Print  
Author Topic: Tutorial: Garcia Mitchell 3-0-0 Spinning Reel Service  (Read 97613 times)
0 Members and 8 Guests are viewing this topic.
foakes
Moderator
Member
****
Offline Offline

Posts: 6342


Sierra National Forest


« Reply #15 on: October 20, 2016, 09:07:00 AM »

Hi G --

Mike is right -- M&C should have these.

But the right thickness and specs are critical on these old Mitchells -- and it might be kind of expensive for just 3 spacers for shipping.

If you have not made arrangements yet, and could use 3 (Mitchell recommends 1-3, as needed) just PM your address and mailing information -- and I will send some out at N/C.

These are the shims for the Pinion, Body, under Rotor assembly -- to take out the roughness for better gear alignment on the pinion.

There are also shims for under the baffle plate, if this is what you need.  Have those too.

Best,

Fred


* image.jpeg (2151.53 KB, 3264x2448 - viewed 269 times.)
« Last Edit: October 20, 2016, 09:13:52 AM by foakes » Logged

It's not about the cards we're dealt -- it is how we play the hand...

"As you get older you find out most of your dreams don't really come true anyway.  They keep you goin', but they don't often turn out.  Still, without them a man never would amount to much."

Elmer Kelton, Pecos Crossing, 1963
triumphrick
Where the heck is Masaryktown??!!
Member
*
Offline Offline

Posts: 157



« Reply #16 on: August 31, 2018, 10:29:05 AM »

This brings back some memories..... Cool

I was twelve in 1959 and this was the first reel that I ever took apart. It was only a year or so old, but I fished every day with it as a kid growing up in Florida...and it had a few issues.

A newspaper on the dining room table and a tin of 3in1 oil and I was off...

I will always remember the first time I had the bail spring out, and could not get it to seat back in place.....a very trying experience for a twelve year old!
Logged

ricksreelservice.com
happyhooker
Member
*
Offline Offline

Posts: 1167



« Reply #17 on: August 31, 2018, 12:12:50 PM »

We all have to start somewhere.

Frank
Logged
handi2
Sensei
Member
***
Offline Offline

Posts: 3454


OCD Reel Service and Repair


« Reply #18 on: November 05, 2018, 02:45:37 PM »

This brings back some memories..... Cool

I was twelve in 1959 and this was the first reel that I ever took apart. It was only a year or so old, but I fished every day with it as a kid growing up in Florida...and it had a few issues.

A newspaper on the dining room table and a tin of 3in1 oil and I was off...

I will always remember the first time I had the bail spring out, and could not get it to seat back in place.....a very trying experience for a twelve year old!

Me too Rick. Those were the only reels available for me to fish with. I fished the Pensacola Beach Pier with a 300 and a 302. We had to fix them ourselves back then.
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
Jdurbin92
Member
*
Offline Offline

Posts: 4


« Reply #19 on: August 06, 2019, 05:50:33 PM »

I’m new to this forum.

Upgrading to carbon fiber drag washers on 300/301 Mitchell’s

How do you know which spot the carbon washer goes in? Do you still use the other washers?
I buy the carbon drag washers off eBay. They are sold in set of 2

Thanks
« Last Edit: August 06, 2019, 07:34:22 PM by Jdurbin92 » Logged
happyhooker
Member
*
Offline Offline

Posts: 1167



« Reply #20 on: August 07, 2019, 05:14:11 PM »

Greetings, Jdurbin, from Minnesota, USA.

I myself do not use carbon fiber on my 300 and related Mitchell reels.  I know some others that do.  I look forward to their (and anybody else's) comments on your question, particularly in light of the fact that Mitchell offered many different spools for the 300, some metal and some not, and I wonder if the answer varies depending on what spool might be in use.

Frank
« Last Edit: August 09, 2019, 05:42:51 PM by happyhooker » Logged
Jdurbin92
Member
*
Offline Offline

Posts: 4


« Reply #21 on: August 08, 2019, 05:22:37 PM »

Crickets chirping
Logged
Swami805
Member
*
Online Online

Posts: 2773


« Reply #22 on: August 08, 2019, 07:12:43 PM »

Pretty sure you just replace the stock washers with the greased CF. As long as they’re the same size you’re just replacing one material with another. If the kit you’re buying  has more washers than the stock reel consult with the vendor for that particular kit. If they’re thinner but the same number of washers you might need to double one up to increase the height of the stack. Other than that good general service as discussed you should be good to go
Logged
Jdurbin92
Member
*
Offline Offline

Posts: 4


« Reply #23 on: August 09, 2019, 04:47:09 AM »

Thank you

Which type of grease do you use on carbon fiber washers?
Just apply grease to the top side?
Logged
Irish1
Member
*
Offline Offline

Posts: 7


« Reply #24 on: September 15, 2019, 06:59:24 AM »

Is Photobucket making these images blurry now so they can no longer be seen? Great tutorial and it's a shame that you can no longer use the pictures for reference.
Logged
Midway Tommy
Tom
Sensei
Member
***
Offline Offline

Posts: 1705


Smack dab in the middle of USA - Eastern Nebraska


« Reply #25 on: September 15, 2019, 07:47:11 PM »

Is Photobucket making these images blurry now so they can no longer be seen?

Yep, they're hijacking photos again for a fee!
Logged

Love those open face spinning reels! (Especially ABU & ABU/Zebco Cardinals)

Tommy D (ORCA), NE



Favorite Activity? ............... In our boat fishing
RELAXING w/ MY BEST FRIEND (My wife Bonnie)
jgp12000
Member
*
Offline Offline

Posts: 22


« Reply #26 on: January 07, 2020, 01:37:24 PM »

I just found this wish I could see the pics now ?
Logged
Fullbail
Member
*
Online Online

Posts: 9


« Reply #27 on: February 13, 2020, 09:05:08 PM »

jgp12000,
You might try right clicking on a blurred out photobucket image.  The window that appears lists various choices. If you select "View Image" with your cursor, your computer should open up a separate window with a clear image.  I am using a PC.
Good Luck,
Bill  Smiley
Logged
oc1
Sensei
Member
***
Online Online

Posts: 2899



« Reply #28 on: February 13, 2020, 11:08:08 PM »

jgp12000,
You might try right clicking on a blurred out photobucket image.  The window that appears lists various choices. If you select "View Image" with your cursor, your computer should open up a separate window with a clear image.  I am using a PC.
Good Luck,
Bill  Smiley

I don't get VIEW IMAGE as one of the right click options.  I have to right click, then click PROPETIES and copy/paste the URL address into a new window.
-steve
Logged
Midway Tommy
Tom
Sensei
Member
***
Offline Offline

Posts: 1705


Smack dab in the middle of USA - Eastern Nebraska


« Reply #29 on: February 14, 2020, 11:29:28 AM »

jgp12000,
You might try right clicking on a blurred out photobucket image.  The window that appears lists various choices. If you select "View Image" with your cursor, your computer should open up a separate window with a clear image.  I am using a PC.
Good Luck,
Bill  Smiley

I don't get VIEW IMAGE as one of the right click options.  I have to right click, then click PROPETIES and copy/paste the URL address into a new window.
-steve

IDK, Steve, it works for me. I get a box with "Open image in new tab", "Save image as...", "Copy Image", "Copy image address", "Search Google for image", and then below a line "Inspect    Ctrl+Shift+l". You can only open one image at time in new tabs, though, but you can have multiple tabs with images.
Logged

Love those open face spinning reels! (Especially ABU & ABU/Zebco Cardinals)

Tommy D (ORCA), NE



Favorite Activity? ............... In our boat fishing
RELAXING w/ MY BEST FRIEND (My wife Bonnie)
Pages: 1 [2] 3   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.501 seconds with 18 queries.