Drag washers wanted

Started by turboal, May 04, 2010, 12:44:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

turboal

Hi all, looking for HT-100 OR Carbontex drag washers. need 6 of them.
Size O.D.>1.039   I.D.>.250  THK>.049
These are for 2 beach reels i am going over for surf fishing.

Roger

turboal, give Dawn a call. She can most likely help you out.
Roger

"Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover."   Mark Twain

turboal


surfcaster

 smooooth drag
7578 braceo st
oak hills ca 92344
760-949-0271 www.smoothdrag.com

turboal

I talked to Dawn and she has nothing in close to that size.
Anybody with any ideas ????????????????????????

Roger

Turboal, you could try this one, it's from smoothdrag for a Shimano CT200

It's   1.051 OD

         .502 ID

         .042 thickness

Get a dremel and knock a little bit off the OD., the ID will be a little larger but that will not matter and your only about .007 less in thickness. Hope that helps....
Roger

"Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover."   Mark Twain

alantani

The list of penn washers is measured in millimeters.  If you have a moment to convert your dimensions, we might be able to find something.
send me an email at alantani@yahoo.com for questions!

Roger

Alan, I totally forgot your list of ht-100's. I just went and grabbed some washers out of the drawer and a set of calipers and measured a few. Yeah, metric is the way but standard is just click away.....
Roger

"Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover."   Mark Twain

turboal

Hi, I went thru that list and none of them will work.
I guess i will have to buy some material and make them.

turboal

Hi all, Dawn says the closest match is from a Calcutta 700
1.065x.325x.044  they just need a little trimming on the o.d.

turboal

#10
Hi all, just a note to tell everyone that Dawn at Smooth drag came
thru. she sent me the drag washers i could modify to fit my beach reel.
Surfs up at the Jersey shore and the strippers and big blues are running.
a 57+ lb stripper was caught last week.I think i need a BIGGER surf rod.