for first timers. new members, or even veterans that just need a quick answer

[Midway Tommy]

Also, once you have connected with the clip you might want to finish removing it in a clear plastic bag as they have a tendency to go airborne when they eventually pop out.

[rcmsangab]

Thanks for the help guys. I dropped in some 3-in-1 oil on that Shakespeare spool and will retry later. See the gap now but just can't get the rin/clip to move. Moved on to another spool from a Dam Quick 220n (see below) and had no problem removing the retaining ring -except for finding it after it shot across the room like you all warned me -should have used the plastic bag trick! 

This drag stack is missing a felt? teflon? washer and the brass washer in the middle looks like it is from another part of the reel. Any sources for 220n drag washers? Also should I post this somewhere else? Thanks for the knowledge.

[rcmsangab]

Hey All! Success with first reel--whole top of spool comes apart. I feel foolish for not figuring it out earlier but found a schematic online after letting it sit a few days. Thanks for the encouragement to keep trying.

[Arkansas Dave]

That's awesome ! I do love the feeling of figuring something out, and workin' on reels.

[wahoowad]

My Daiwa Fuego 1000LT spinning reel is about 2 years old. The original butter smoothness now has a 'clacking' noise and feel when I hold the spool still and move the handle back and forth. Under normal fishing I can still feel this clacking as I turn the handle. Is this a worn gear or just a need for grease?

[Donnyboat]

there is a nut on the oppersate side of the handle, is that working its way loose, keep it firm. good luck cheers Don.

[wahoowad]

there is a nut on the oppersate side of the handle, is that working its way loose, keep it firm. good luck cheers Don.

This reel has a screw in handle. The play is coming from somewhere else.

[JasonGotaProblem]

Could be wrong but I'm thinking loose rotor nut.

[KouzK]

Hey guys,
New to the forum here. My father from Missoula used this Orvis 50a when he was in school there to fish. A part inside the spool broke and was told it would be hard to find someone to fix it.
So, on behalf of my father i am reaching out to see if anyone is able to fix these reels/has parts for them. Does anyone know somebody who can fix this reel for my father?
Thank you for the taking the time to read this.
-Kevin

[alantani]

welcome!!!  any chance you could pop off the spool and take a few photos?  let us know if it cranks ok and if the bail works.

[Midway Tommy]

Hey guys,
New to the forum here. My father from Missoula used this Orvis 50a when he was in school there to fish. A part inside the spool broke and was told it would be hard to find someone to fix it.
So, on behalf of my father i am reaching out to see if anyone is able to fix these reels/has parts for them. Does anyone know somebody who can fix this reel for my father?
Thank you for the taking the time to read this.
-Kevin

Welcome!

Being a little more specific as to which part/parts are needing repair would sure help, plus removing all that tangled line would be a good idea as it is no longer useful.

There are a couple of guys here that have the knowledge and ability to repair the Italian made Orvis reels.

[Lunker Larry]

glad you showed that. I don't do many spinners but was not aware of a spool coming apart like that. Thanks for the pic.