Any alternate foot for 2/0

Started by basto, June 01, 2016, 05:31:47 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

basto

Hi guys
Is there any other foot that will fit a 2/0 Senator besides the stock one?
cheers
Basto
DAM Quick 3001      SHIMANO Spedmaster 3   Jigging Master PE5n

Maxed Out

Quote from: basto on June 01, 2016, 05:31:47 AM
Hi guys
Is there any other foot that will fit a 2/0 Senator besides the stock one?
cheers
Basto

Yes, the 99 seat will fit along with a 65 spool and posts, or a 3/0 seat will fit along with a 3/0 spool and posts. I may have a slightly used 99 seat and 65 spool I'd sell for cheap if you wish to go that route


  Ted


 
We Must Never Forget Our Veterans....God Bless Them All !!

basto

Hi Ted
Thanks for your reply. I have read that a spool from an 85 or 285 and posts from these will fit if I can find a stand to match these.
Does this sound correct to you?
Basto
DAM Quick 3001      SHIMANO Spedmaster 3   Jigging Master PE5n

Maxed Out

Quote from: basto on June 01, 2016, 10:47:22 PM
Hi Ted
Thanks for your reply. I have read that a spool from an 85 or 285 and posts from these will fit if I can find a stand to match these.
Does this sound correct to you?
Basto


Yes, the 85 , 285, and long beach 60 all use same metal spool that a 2/0 uses. Posts interchange as well.

  Ted
We Must Never Forget Our Veterans....God Bless Them All !!

basto

Ted
Thanks for your help. Finding the stand that marries with these is going to be the tricky bit.
Basto
DAM Quick 3001      SHIMANO Spedmaster 3   Jigging Master PE5n

BryanC

Quote from: basto on June 03, 2016, 12:04:46 AM
Ted
Thanks for your help. Finding the stand that marries with these is going to be the tricky bit.
Basto

If the posts & spool work, then wouldn't a 30-85 stand fit as well?  It appears that they are available at Scott's.

basto

30-85 stand is available but does not fit the 2/0 side plates
DAM Quick 3001      SHIMANO Spedmaster 3   Jigging Master PE5n