Accurate conversion

[pizzaman]

I have 2 aacu frames, spools for a 112 wide. Can you upgrade the drags and if so how manty pounds of drag can be expected?

[alantani]

the absolute maximum is 15 pounds, but that will damage the gears.  figure 8-10 pounds for a good working load.  i would just grease the drag washers (make sure you have all carbon fiber) and install a stainless steel gear sleeve http://alantani.com/index.php?topic=157.0  with heavier drag settings, the stainless steel gear sleeve is essential.  then decide what kind of handle you want.  this could get very expensive very quickly, and for a reel that will not deliver THAT much drag.