700 bail arm bumper?

Started by jgp12000, July 07, 2026, 12:46:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

jgp12000

July 07, 2026, 12:46:55 PM
Is this the bail arm bumper,nothing was in the hole? Is something missing?

Also,there is an indentation on the OEM bearing does orientation matter?

drumbum

#1
July 07, 2026, 01:37:08 PM Last Edit: July 07, 2026, 01:38:32 PM by drumbum
Quote from: jgp12000 on July 07, 2026, 12:46:55 PMIs this the bail arm bumper,nothing was in the hole? Is something missing?

Also,there is an indentation on the OEM bearing does orientation matter?

If you have any rubber left in the cup you can extent usefulness by adding a small o-ring on the backside before inserting.

A small amount of glue may help retain it.

Bearing can go either way (as far as I know),....pack it with thinned grease if you can.

jgp12000

#2
July 07, 2026, 02:18:56 PM
I ordered a bail bumper before I found the original in the box. Some Google photos appear to have different configurations of bail bumpers?

 https://www.mysticparts.com/PennParts/Parts/33-704SP.aspx

oldmanjoe

#3
Today at 01:59:51 PM
That bearing has a snap ring groove , it can go in either way .
Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
Character is doing the right thing when nobody is looking .   There are too many people who think that the only thing that!s right is to get by,and the only thing that's wrong is to get caught .
The power of Observation   , It`s all about the Details ..
" Life " It`s a thinking man`s game
 "Mitten im blickfeld versteckt 
" I cannot teach anybody anything   I can only make them think "     - Socrates-
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare
Print
Go Up Pages1
User actions