Titanium Spinner

Started by Bryan Young, May 16, 2013, 03:44:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Mandelstam

I'm having doubts. If you have a real product, why only show computer graphics of every single product on your webpage?
"Fish," he said softly, aloud, "I'll stay with you until I am dead." - Santiago, Old Man And the Sea

Dr. Jekyll - AKA MeL B

#16
if they decide to produce it and if i have the money for it i wouldn't buy  it. from my research and extensive use of different type of metals during my RC car days Ti is harder than steel but flexes more in comparison to steel. of course  i'm neither an engineer/metallurgist nor a scientist...  ;D

whalebreath

Quote from: alantani on May 17, 2013, 02:24:30 AM
very sad.....  i watched "nantucket sleigh ride" and you could SEE the drags sticking.  someone please get in touch with the manufacturers and have them contact smoothdrag.com to get some decent drag washers and some cal's grease.  probably just as well that be broke off.
Yes the thing jerks like crazy-plus his technique is lacking and he needs a better setup to fight fish that big some kind of harness or plate on the kayak to secure the rod and give it a better angle.


Quote from: Mandelstam on May 17, 2013, 02:00:54 PM
I'm having doubts. If you have a real product, why only show computer graphics of every single product on your webpage?
The real product is in the videos.


Bryan Young

#18
My message to and from FORTiTUDE Fishing

From: Bryan Young [mailto:hawaiianfishinboy@yahoo.com]
Sent: Friday, May 17, 2013 12:52 AM
To: Info@fortitudefishing.com
Subject: Notification 1 from Bryan Young - Ti reel

Subject        Ti reel        
Your Message        I am interested in your reels as do many of my friends.  Would you please send me additional information. Additionally, I had watched your videos and must say, you drags need improvement. It should not be that jerky. You may want to contact Dawn at SmoothDrags for some of the best carbon fiber drag washers and grease them with Cal's drag grease. You will love the difference.

Would you mind sharing the schematics and would it be possible to do a write up on the reel and post it on AlanTani.com?  I'm sure it would help get the word out on this reel. Please let me know if you are interested.

Quote
Bryan,

Thanks for your comments and suggestions but the reels in the pictures are not Fortitude's.  They are just old footage of our company founder fighting tuna offshore in a kayak that the media requested.  

All reel specs approved for release are attached above.

Regards,

 Dave

David Lamoureux, CFA
Founder & CEO
Mobile:  +1.312.912.3188
Email:  Dave@FortitudeFishing.com  | Web: http://fortitudefishing.com

Note the information provided is the same as on the their site.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D