what reel do these belong to?

[broschro]

Ok what reel do these belong to?
I have the stand and clamp for these 2.

[Dynamo]

Sorry, what is it?

[Keta]

It's wider than a 501 or 100, what is the hole spacing? 

Sorry, what is it?

It's a Newell cross bar.

[broschro]

It's wider than a 501 or 100, what is the hole spacing? 

Sorry, what is it?

It's a Newell cross bar.

1 3/8 i think

[broschro]

It's wider than a 501 or 100, what is the hole spacing? 

Sorry, what is it?

It's a Newell cross bar.

1 3/8 i think

or 1/14

[broschro]

the guy i got them fro said 99 jigmaster newell 

[Dynamo]

It's wider than a 501 or 100, what is the hole spacing?  

Sorry, what is it?

It's a Newell cross bar.

Aha, thanks.

[Keta]

the guy i got them fro said 99 jigmaster newell  

It's not for a Surfmaster 150, the holes are 3/4" apart.  I have to take a bunch of produce down to my shop to dry out and I'll check my 99 and 99 width Jigmaster when there.

[Alto Mare]

It sure looks like a Squidder 145 or Surfmaster 150 and some Newells, not sure on model.
Check the hole space again, as Lee mentioned it should be 3/4" center to center.

[broschro]

it's driving me nuts thanks Lee

[broschro]

[broschro]

the stand and the bars are the same width.

[Alto Mare]

You're using a tape measure from the boat . Don't use the metal clip on the tape, start with the 1" mark and hold it in the center of the hole.

[broschro]

[Keta]

They look like Newell 99 width Jigmaster conversion parts, the width is 99 (2-1/8") and the hole spacing is Jigmaster (1/2").  If you are converting a 500/501 to 99 width you appear to have the right parts.