Penn 450 SS front loading spool issues

Started by bamacrazy, June 23, 2022, 10:27:47 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

bamacrazy

June 23, 2022, 10:27:47 AM
I have an old 450ss that I bought new 30 years ago. I took it to a shop for service 15 years ago. Since then, the reel winds more line on the front of the spool. There is about a 35 degree incline in line level going from back to front. what causes this and how can I fix it?

JasonGotaProblem

#1
June 23, 2022, 10:52:12 AM
Sounds like you need to shim your spool higher. These reels will never have perfect line lay but it can certainly be improved.
Any machine is a smoke machine if you use it wrong enough.

oldmanjoe

#2
June 23, 2022, 02:28:59 PM
Line diameter and shims go hand in hand .  Generally the smaller diameter needs more shims .
   
   You can make shims from plastic containers .   Add two shims , pull off some line and rewind it .

    Repeat until you are happy with the results ..
Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
The power of Observation   , It`s all about the Details ..
" Life " It`s a thinking man`s game
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare

bamacrazy

#3
June 23, 2022, 04:32:17 PM
Fantastic! I'll try that. :d

Squidder Bidder

#4
June 23, 2022, 04:38:34 PM
I had a 450ss a while ago and the whole rotor assembly was bottoming out and grinding when turning the handle. Couldn't figure out what it was for the longest time - then I looked up the schematic and it turns out that those little thrust washers are important.  ;D
Print
Go Up Pages1
User actions