Done:Accurate ATD 30s and 50s Stainless Steel Handle Arms, 1" longer than stock

Started by Bryan Young, March 12, 2015, 07:29:17 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bryan Young

Hello,

A member asked me to help make him stainless steel arms for his ATD30 and ATD50 that is 1" longer than the stock arms.  The general design and shape will be the same as stock.

To help bring the cost down, it would be beneficial if I made more than just a few, and therefore, am offering up a opportunity if you are interested.  No commitment is needed at this time, but would like to get a general interest and how many I should make.

If you are interested, please post a the number you would be interested in purchasing. 

After I get the design I will post it up here, then provide an estimated cost per arm. 

Thank you,
Bryan
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

alantani

send me an email at alantani@yahoo.com for questions!

Bryan Young

Quote from: alantani on March 12, 2015, 05:50:59 PM
i'll get in on this also.  stainless would be very nice!
I can make them standard length or longer.  A member just indicated that he would like a few that are 1" longer, but I can make standard lengths as well.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Bryan Young

So here are the drawings.  Same design as Alan's handle arms then I discovered that there are 2 types of arms, but I only designed one as shown in normal and longer length.

They will be cut from stainless steel.

funny, these are really two drawings and with different lengths.  Not sure what happened when downloading the illustration.

The normal length is the stock length.  The longer is 1" longer.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

wokdwok

Just wondering if you or anyone can get a couple longer Atd30 reel handle shafts, dimensions & price?

Thx

Bryan Young

Quote from: wokdwok on January 14, 2023, 04:27:10 PMJust wondering if you or anyone can get a couple longer Atd30 reel handle shafts, dimensions & price?

Thx
I'm sorry. I no longer have these. The last remaining went to an ungrateful customer complaining about the cost of a very limited run of parts, which was the actual cost to cut the parts from the laser cutter, that he actually didn't pay for the parts. I promised to NEVER deal with him again and will let karma deal with him.

I'll be gladly send you the drawing and you can find someone to cut and tap them if you wish. Please send me a PM to where you would like me to send the raw drawing to.

Bryan
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D