tools of the trade

jtwill98 · January 29, 2023, 05:31:34 AM

I forgot to add one more item I find useful. I service reels at my soldering bench, which also has a 10x magnifying lamp that I find useful with my aging eyes.

handi2 · January 29, 2023, 09:43:51 AM

I use the Milwaukee power M4 power screwdriver that has a great clutch. The clutch is so light I have to tighten the screws with a screwdriver after. Or I use the M4 to tighten on larger reels.

Keith

Shellbelly · January 29, 2023, 02:52:55 PM

Quote from: jtwill98 on January 29, 2023, 05:31:34 AMI find useful with my aging eyes

That's a frustrating problem. I got these from a long-retired machinist. A bit comical, but they work. Jewelers glasses with multiple lenses would be another option.

My reel work area is in our living room so I can't get too "industrial" in there and the garage is a sawdust factory.

handi2 · January 29, 2023, 05:37:34 PM

Quote from: Shellbelly on January 29, 2023, 02:52:55 PM
Quote from: jtwill98 on January 29, 2023, 05:31:34 AMI find useful with my aging eyes
That's a frustrating problem. I got these from a long-retired machinist. A bit comical, but they work. Jewelers glasses with multiple lenses would be another option.

My reel work area is in our living room so I can't get too "industrial" in there and the garage is a sawdust factory.

I've seen those used in movies

They are cool 😎

oldmanjoe · January 30, 2023, 04:06:20 PM

Quote from: Shellbelly on January 29, 2023, 02:52:55 PM
Quote from: jtwill98 on January 29, 2023, 05:31:34 AMI find useful with my aging eyes
That's a frustrating problem. I got these from a long-retired machinist. A bit comical, but they work. Jewelers glasses with multiple lenses would be another option.

My reel work area is in our living room so I can't get too "industrial" in there and the garage is a sawdust factory.

Anybody know the proper name for those glasses , They are kinder cool to have around . I know there are a lots of head band types and some clip on eye loops .
When I fly under the radar in the living room "reel shop"
And when my glasses need glasses , I use a hanging magnifier or a hand held .
The garage has the swing arm with light magnifier .

PacRat · January 30, 2023, 05:21:35 PM

My dentist uses something similar. It has a small light in the middle and it fits over his glasses. An advertisement for a similar device recently popped up on my computer but I scrolled past it when I saw the price. I believe it was a bit north of $500.

foakes · January 30, 2023, 05:22:44 PM

There is a dual lighted Electrix magnifier permanently mounted to the main bench. Just moves out of the way when not needed.

Also use a color 20X Merlin when needed for very close inspection.

When Micro-Tuning a reel for best & smoothest function —- it is amazing the tiny flaws or burrs that can be detected on parts with these —- but invisible to the naked eye even with glasses.

Makes all the difference —- and makes everything quicker and more effective operating.

Best, Fred

kevin cozens · August 30, 2023, 12:44:08 AM

I recently purchasd a smooth drag 8 in 1 spanner from blakdog tackle here in the UK.
What i would like to get hold of is a better wench for the handle nuts fitted to mitchell 600 series multipliers.
The OEM supplied took is OK but its a little on the short side.

MeanMachine · May 02, 2024, 04:24:31 AM

This is a good tip for application of grease to tight spots. There are cheaper ones out there but this one is about the best you can get.

Bloke · June 26, 2024, 05:54:01 AM

I'm new here and was wondering if anyone knows of a tool made to remove 2.5mm(?) E Clips, specifically those holding bail arm to Daiwa 22 Exist 3000?

GerryR · June 26, 2024, 11:22:49 AM

Quote from: Bloke on June 26, 2024, 05:54:01 AMI'm new here and was wondering if anyone knows of a tool made to remove 2.5mm(?) E Clips, specifically those holding bail arm to Daiwa 22 Exist 3000?

I have a tool, CS-1022, from Jonard Tools (Jonard.com) that will work down to .156" (3.96mm) outside diameter; they may make one that goes smaller.

Bloke · June 26, 2024, 11:36:10 AM

Quote from: GerryR on June 26, 2024, 11:22:49 AM
Quote from: Bloke on June 26, 2024, 05:54:01 AMI'm new here and was wondering if anyone knows of a tool made to remove 2.5mm(?) E Clips, specifically those holding bail arm to Daiwa 22 Exist 3000?

I have a tool, CS-1022, from Jonard Tools (Jonard.com) that will work down to .156" (3.96mm) outside diameter; they may make one that goes smaller.

Many Thanks, Gerry!

I'll check it out.

Lunker Larry · June 26, 2024, 05:18:22 PM

Made a tool for those stubborn Shimano line guide pawls. It from a Abu Beast side plate finger screw that broke.
Threads on it fit the pawl perfectly to pull it out. Used the handle from a cheapo screw driver I had.

foakes · September 24, 2025, 06:16:44 PM

I know that a lot of folks will get tired of me promoting tools that I have found effective in reel repair —- but here is one more anyway.

😕😁

I have a pair of Knipex extractor pliers in 200 size (8").

They have worked on 99% of damaged screws, nuts, fused parts, even rusted issues.

They are like having a set of shark teeth on your bench.

They are quick, and just bad-#### effective.

Also great for pulling wire, projects out in the workshops, and automotive work.

I saw this little 150 size (6"), and picked one up.

What a little powerhouse. Even with a tiny bit of a broken screw extending out, this just grabs hold and easily removes the offender.

Best, Fred

Marlinmate · September 25, 2025, 12:18:19 AM

I gotta get one now