Reel Repair by Alan Tani

They are probably a click away but I can't find any. And Tiburon's site is under construction. Specifically I'm looking for a P21 for my 501 before I put the 5+1 drag stack in.

Jeff

Vintage offshore tackle (Randy) might have something. He's in the vendor section here
I like the accurate frames better if you can find one somewhere
Also the Cortez conversions bars and bases are a good option, plenty strong and saves a bit of weight. He's on here too

I have a gold accurate and/or a blue tiburon. Both primo.

https://tiburonfishingreels.com/frames/

Get one of Randy's.

Thanks.
Tiburonengineering is under construction but the Tiburonfishing link is good. I'll find out what Randy has and if he also has a SS sleeve and fine thread star 

Quote from: Swami805 on November 30, 2024, 05:37:44 PMVintage offshore tackle (Randy) might have something. He's in the vendor section here
I like the accurate frames better if you can find one somewhere
Also the Cortez conversions bars and bases are a good option, plenty strong and saves a bit of weight. He's on here too

Thank you Sheridan.

Quote from: Keta on November 30, 2024, 09:13:40 PMGet one of Randy's.

Thank you Lee!

Any more  frame and spools for a 501 available?

I have 501 Newell kits, but the only have one-piece frame that I have at the moment is a black Tiburon 501 frame that has one screw broken off on each side that you could have for $30.

I don't think that it's a functional problem with five screws remaining on each side.  It would be very difficult, but not impossible, to drill out the broken off screws and re-tap the holes.

I have had a 10% or less success rate drilling out corroded screws in reel frames using a mill.  A bit of grease prevents a lot of greaf.

im just using it for my squid jig rig should not matter. im using a 501 and a similar diawa right now. the 501 is way less maintenence intesive by far. any spools or will the penn spools work?

Quote from: teffy on December 24, 2024, 01:08:02 AMim just using it for my squid jig rig should not matter. im using a 501 and a similar diawa right now. the 501 is way less maintenence intesive by far. any spools or will the penn spools work?

Your stock 501 spool will work fine, but I do have both Newell and Penn aluminum spools if you need an extra.