Revisiting the Diawa Sealine 300/400 drags and dogs

Started by gstours, November 16, 2026, 03:37:59 PM

Previous topic - Next topic

bja105 and 2 Guests are viewing this topic.

gstours

As far as I know most of the info I did was posted here a few years ago ....but the photos have been overridden and Mr, Decker asked for some advice and overall performance of the project.  So.

 My computer skill are lacking and this might be a poor quality oriented post.  Butt.

Decker

Gary, thanks!!!  Looks like you cut and welded or braised the stock SS dog.  Do tell. 
And you know that you're over the hill,
When your mind makes a promise that your body can't fill,
Doin' the old folks boogie and boogie we will,
'Cause to us the thought is as good as a thrill...

gstours

Yes,  i had some problems posting the modified AR dog,  butt here is more info.  Yes the stock AR dog was cut and reconfigured to fit in the opposite side in the plate much like the Penn 113 more popular mods. yes it was braized and reground minimily to save strength

th.


 in the lower right of the photo I used JB Weld to fit a loop of sst wire into 2 wire diameter holes drilled in the area shown.  This will hold the second AR dog spring in place.

gstours

Here is the bridge assembly in place in the sideplate.  The spring was from a ball point pen.


gstours

The modified drag and AR dog reel is shown here posing with 23# static drag in my test device.

gstours

As mentioned in earlier posts the drag washers are now .025 thick, and the star shaped carbon fiber washers thickness will be show again here. 

gstours

These are made by hand, and did work very well.  From a sheet of carbon fiber material.  Thickness  .040"

gstours

The main gear was modified by cutting the star with a drill press and a crossfeed table vice.
  A flat bottom end mill was used to accurately remove the metal to an octagonal shape.  The cf washers are made to fit into the octagon main gear.  The brass was fairly easy to cut.   This drag works very well.  The 300 and 400 sealine has both caught several 200-245 pound halibut as a testament to its modified capabilities.

gstours

A trio of these Sealine series have been modified in similar methods,  the 600 produces over 35# drag, all have double dogs and improved crank arms and knob grips.   These reels are fairly easy to find for a good price used on e-bay and well made for the money.