Penn 113 HLW Special Senator Anniversary Edition

[broschro]

Please let us know what you find out about the lugs.  Perfect for my jigging 113

[BMITCH]

Hey guys, when I did my 113h tank. I used part 54-113HN harness lug. I cut off the the ring part and ground down the sharp edges. It's really just a plug at this point but it has the right curve to it.
Bob

[Alto Mare]

Just one.  I've never had a single SS dog fail...maybe I'm not catchin' big enough fish!  lol!

The second dog isn't just about the one dog failing, there is more to that.

[pompano joe]

I'm all ears Alto...I've learned most of what I know from you guys and always appreciate your knowledge and input!

On the harness lugs, I ordered part number 54-113 HN from mysticparts.com.  However, the part I received is different from those pictured on the site.  There's no ring.  Don't know if these were earlier or later that what Scott's shows.  But that's definitely the part number on the invoice.  Previous to this I just cut the ring off the lugs and shaped them the match the curve of the outer ring.  Problem was the cut exposed the bronze interior.  Not a biggy, but I've got issues and it wouldn't work for me.  

Don't remember where I got the tip on the Baja Special parts, but I would guess my friend Keith showed me a Baja Special and I started looking.

BTW, the slotted bearing cap discussed earlier in this thread came from a Penn 210 from the Mag Tuned series.  Mysticparts.com didn't have them when I last looked.  I did get a few from Southwestern Parts and Service, but they could have been sitting on the shelf there forever.  Anybody checked with Penn?


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"