alan tani @ alantani.com fishing reel repair rebuild tutorial Penn 110 1/0 (The Mini Tank)
Reel Repair by Alan Tani
October 22, 2019, 12:33:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 2 3 [4] 5   Go Down
  Print  
Author Topic: Penn 110 1/0 (The Mini Tank)  (Read 29667 times)
0 Members and 1 Guest are viewing this topic.
sharkman
Member
*
Offline Offline

Posts: 511


« Reply #45 on: July 29, 2016, 08:11:42 PM »

I think these little reels are awesome. Just got my frame today. Thanks to all here for the handle, drag set, and frame. Now just need to double dog


* image.jpg (1646.93 KB, 3264x2448 - viewed 259 times.)

* image.jpg (1874.08 KB, 3264x2448 - viewed 248 times.)
Logged
Rancanfish
Member
*
Offline Offline

Posts: 1724


« Reply #46 on: July 30, 2016, 10:36:48 AM »

Nice job.  These are great little reels, I have three now.

I'm holding off on double dogging mine.  Not sure I'll ever stress it enough.
Logged

Can't sleep, clowns will eat me.
sharkman
Member
*
Offline Offline

Posts: 511


« Reply #47 on: October 05, 2016, 10:53:13 AM »

Just got to take mine on an all day fishing trip. Unfortunately didn't catch anything big enough to stress test drags. Did catch a bunch of gray snapper (aka grunts). Going to tear back into the reel.  Something is just a little off and I cant put my finger on it.  I have a little scrubbing sound occasionally when reeling in fish and some back play.
Logged
nelz
Member
*
Offline Offline

Posts: 839



« Reply #48 on: March 15, 2018, 07:22:20 PM »

Pics needed?  Pic#1 shows bridge post and sleeve with cutout area on bottom to cover oiled felt on post.  Pic #2 shows stock sleeve on bottom with a smaller I.D.
Is the oiled felt disk shown on the post a stock part? I don't remember seeing it when I serviced my 110.
« Last Edit: March 15, 2018, 07:24:51 PM by nelz » Logged
mo65
The Freshwater Kid...Chillicothe, Ohio
Sensei
Member
***
Offline Offline

Posts: 3170


"This ship is filthy Mr. Christian!"


« Reply #49 on: March 16, 2018, 06:34:34 AM »

Over the years there were several gear sleeve/gear post designs, this oiling felt being one of them. The most annoying design is the one with the smaller diameter post...known for throwing a cog in the wheel when wanting to upgrade to a stainless steel sleeve. Cool
Logged

~YOU CAN TUNA GEETAR...BUT YOU CAN'T TUNA FEESH~

Swami805
Member
*
Online Online

Posts: 2659


« Reply #50 on: March 16, 2018, 08:37:36 AM »

Been wanting to do a 1/0 for awhile and trying to find a "victim". I do have a 259 live bait caster and thinking of using that instead. Is it pretty much a wide 1/0 and the same tib frame and spool would work? Would the 259 be a good canidate for the available upgrades or should I keep looking for a 1/0. Thanks
Logged
nelz
Member
*
Offline Offline

Posts: 839



« Reply #51 on: March 16, 2018, 08:59:59 AM »

Over the years there were several gear sleeve/gear post designs, this oiling felt being one of them.

Ok, so there was nothing there when I pulled off the sleeve, no washer or felt. The sleeve just sat on the post by itself. So this is the stock configuration then?
Logged
Benni3
Member
*
Online Online

Posts: 2446



« Reply #52 on: March 21, 2018, 07:01:24 PM »

How much max drag do you get ?,,,,,how much line does it hold? Smiley Cheesy Grin
Logged
thorhammer
Member
*
Online Online

Posts: 4044


"You can't drank all day if you don't start..."


« Reply #53 on: March 22, 2018, 05:09:44 AM »

Capacity wise, it uses a 501 spool.
Logged
Decker
Moderator
Member
****
Offline Offline

Posts: 1521


One fish, two fish, redfish, bluefish.


« Reply #54 on: March 22, 2018, 06:54:46 AM »

Been wanting to do a 1/0 for awhile and trying to find a "victim". I do have a 259 live bait caster and thinking of using that instead. Is it pretty much a wide 1/0 and the same tib frame and spool would work? Would the 259 be a good canidate for the available upgrades or should I keep looking for a 1/0. Thanks

Sheridan, yes the 259 is just about the same.  As Mo mentioned above, some come with an older bridge with a thin post that won't work with the SS sleeves.  Here is a post where GFish ran into that:  http://alantani.com/index.php?topic=17534.msg255990#msg255990   If you need the newer bridge, I may be able to help.   /Joe
Logged
Swami805
Member
*
Online Online

Posts: 2659


« Reply #55 on: March 22, 2018, 12:49:27 PM »

Thanks Joe. I think I have something that should work
Logged
Gfish
Gfish
Member
*
Online Online

Posts: 2150


What? Me worry?


« Reply #56 on: March 22, 2018, 02:01:55 PM »

Yeah. Joe came to my rescue with a 3-99 bridge that'ed fit a ss gear sleeve upgrade. Those larger OD-stud 3-99 bridges are getting hard to find. Looked at trying to make a 3-500 or a 3-60 bridge plate fit, but just couldn't line the screw holes up with the 259 plate. The reason I used a 113H stand with 6 total screws was cause a the width a the 259 spool and the possible need to strengthen the frame, given the other upgrades.
« Last Edit: March 22, 2018, 02:02:44 PM by Gfish » Logged

Fishing tackle is an art form and all fish caught on the right tackle are"Gfish"!
nelz
Member
*
Offline Offline

Posts: 839



« Reply #57 on: March 22, 2018, 06:18:47 PM »

As Mo mentioned above, some come with an older bridge with a thin post that won't work with the SS sleeves. If you need the newer bridge, I may be able to help.   /Joe

Joe - can you measure the width of the post on that newer bridge? Thx.
Logged
Decker
Moderator
Member
****
Offline Offline

Posts: 1521


One fish, two fish, redfish, bluefish.


« Reply #58 on: March 22, 2018, 09:28:00 PM »

Joe - can you measure the width of the post on that newer bridge? Thx.

Sorry, Nelz, don't have one handy, but will let you know if I come across it. /Joe
Logged
mhc
Sensei
Member
***
Online Online

Posts: 943


« Reply #59 on: March 23, 2018, 12:29:08 AM »

I'm not confident in the accuracy of my calipers, but I measured ~ 5.5 mm (0.2165") for a newer post and ~ 4.76 mm (0.1875) for the older narrow post.

Mike
Logged

It can't be too difficult - a lot of people do it.
Pages: 1 2 3 [4] 5   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.213 seconds with 16 queries.