450ss

Started by Shark Hunter, November 06, 2016, 02:22:20 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Shark Hunter

I have been on a spinner buying frenzy lately. Mainly the Z series, but I can't resist a 450ss.
I've purchased two in the last two weeks.
This one was another two reel deal with a 4200ss. Not that I wanted it, but it came with it.
Anytime you can get a 450 or 550 for less than a Benjamin in good shape, I jump to it.
This one looked really nice, but looks can be deceiving.
Someone attempted to service this reel, but instead of disassembly and cleaning, they just poured oil on top of it.
I have other reels I need to work on, But I tore this one completely down.
There is no other way, except the right one. ;)
All fasteners and screws were loose. It felt very rough on cranking, I thought immediately Gears and Bearings.
The rotor nut was loose and the dog was missing part of the metal.
I have any other dogs in stock but not this one. ::)
If it would have been any other one. I have it.
Life is Good!

Shark Hunter

#1
Cleaned all the bearings and removed one shield, Made a feeble attempt to make a sprung dog. It didn't work.
I'll get the proper dog to make it complete. I put it back together as is for now.
Bearings lubed with reel x and gears with Penn Blue.
Very smooth and a piece of Penn History.
My work schedule only allows me one day a week to work on reels. I look forward to it. ;)
Thanks for the handle Fred.
Life is Good!

foakes

On the way in the mail Monday morning, Daron --

You should receive it Wednesday --

Best,

Fred
The Official, Un-Authorized Service and Restoration Center for quality vintage spinning reels.

D-A-M Quick, Penn, Mitchell, and ABU/Zebco Cardinals

--------

The first rule of fishing is to fish where the fish are. The second rule of fishing is to never forget the first rule.

"Enjoy the little things in Life — For someday, you may look back — and realize that they were the big things"
                                                     Fred O.

Shark Hunter

Fred,
You are spoiling me. ;)
I insist on paying you.
Life is Good!

Bryan Young

Penn 450s are like a Daimond in the rough.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

FatTuna

That is an impressive set of organized gears and parts.

Shark Hunter

#6
I had to refer to some of Sal's expert tutelage to complete this one.
Word of Caution, Don't attempt the bail trip internals after a six pack. ;)
Life is Good!

Shark Hunter

#7
I found a 450ss this week for 40 bucks. It was in 10 condition.
It just had some bail issues. Listed as a penn ultra light.
When I got it. I took the bail and all the springs off, because there seemed to be a anti reverse issue.
The tab that keeps the dog in place has been broken off as you cans see in the pic. (it is next to the bail wire)
Never seen this before. I will buy a new housing to take care of that.
I was going to drill it and put a pin or wire in it, but $20 for a new housing will be the better option.
I'm still only $60 deep and this reel is as nice as they come.

Life is Good!

Gfish

#8
Quote from: FatTuna on November 06, 2016, 08:15:13 AM
That is an impressive set of organized gears and parts.

Yeah. Looks real "Fred-esk" there Daron.
Gfish
Fishing tackle is an art form and all fish caught on the right tackle are"Gfish"!

mhc

Nice 450 Daron - it deserves a new part to keep it stock.

Mike
It can't be too difficult - a lot of people do it.

Alto Mare

Nice Daron ;). Those are sweet little reels, hated by must younger dummies, that enjoy the new crap of today...I mean reels. ;D

Sal
Forget about all the reasons why something may not work. You only need to find one good reason why it will.

Shark Hunter

I managed to get the parts in a few days without bothering Fred. ;)
Brand new body from Betty and Nick's tackle for $20 bucks shipped.
A bail screw and two springs for $9. I will be making her purr this weekend. ;D
Picked up that 8500 too last week. I can't pass up a bargain on such a nice reel. ::)
Life is Good!

Decker

I'm familiar with the 550SS and 650SS...  Questions: 

1) What makes the 450SS better than the 4500SS or 450SSG? 

2) What type of fishing do you do with a 450S, and what rod and line do you match it with?

Thanks

Shark Hunter

4500 ss has a graphite frame and rotor. Most parts will interchange.
4500 ssg, also graphite and Chinese made. Has a anti reverse bearing instead of dogs and some other design changes.
450 ss is an all metal reel with anti reverse dogs and made in the USA. Short production run from Mid 80's and then Discontinued in 1992.
450ss is the second generation spinfisher, first is the greenies and z series.
4500ss is the third.
SSG models were the fourth.
Not really an ultra light. Can hold 300 yards of 10lb test.
Life is Good!

Shark Hunter

Took all the parts off of the old case and onto the new.
I have did quite a few of these, but there is still an issue with this dog.
It has been beaten enough to break the tab on the old one, that it grabs intermittently.
I'll get it right, but I am happy for now. Pretty much brand new 450ss.
Life is Good!