alan tani @ alantani.com fishing reel repair rebuild tutorial Comparision on 113H Gear between Ebay one and 316 SUS in pictures
Reel Repair by Alan Tani
October 20, 2019, 03:30:22 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Comparision on 113H Gear between Ebay one and 316 SUS in pictures  (Read 9491 times)
0 Members and 1 Guest are viewing this topic.
Black Pearl
Member
*
Online Online

Posts: 1279


WWW
« on: March 21, 2013, 11:01:04 AM »

This morning I received 17 sets of the 316 SUS gear set and the Ebay gear set from my resource.

The pinion gear feels a little lighter on weight. I don't have the scale to compare it. I just sent out a set to Sal and a set to Dom. We will see what they have to say.

Here are few pictures I just took.









Logged
alantani
admin
Administrator
Member
*****
Offline Offline

Posts: 17740



« Reply #1 on: March 21, 2013, 01:05:37 PM »

not sure they would function differently, but there is a clear visual difference.  well done, sir!
Logged

send me an email at alantani@yahoo.com for questions!
Dr. Jekyll - AKA MeL B
Member
*
Offline Offline

Posts: 1929



« Reply #2 on: March 21, 2013, 01:54:25 PM »

not sure they would function differently, but there is a clear visual difference.  well done, sir!
x2
Logged
RowdyW
Firearms Group
Member
**
Online Online

Posts: 2459



« Reply #3 on: March 21, 2013, 03:32:02 PM »

X3 , can't wait to get them.
Logged
Black Pearl
Member
*
Online Online

Posts: 1279


WWW
« Reply #4 on: March 21, 2013, 03:43:30 PM »

X3 , can't wait to get them.

Hi,

I sent you a PM. Please check your PM. Your set is waiting for you right now.

Thanks,
--Alan
« Last Edit: March 21, 2013, 03:55:20 PM by Black Pearl » Logged
Keta
D'oh!
Moderator
Member
****
Online Online

Posts: 8660


Klamath Falls, OR US


« Reply #5 on: March 21, 2013, 03:50:00 PM »

It's hard to tell for sure from the photos and the plating but the pinion on the right appearers to be cast.

« Last Edit: March 21, 2013, 03:51:14 PM by Keta » Logged

Hi, my name is Lee and I have a fishing gear problem.
A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain
Cone
Firearms Group
Member
**
Offline Offline

Posts: 1225



« Reply #6 on: March 21, 2013, 04:44:27 PM »

Alan, Your gears look much better! I look forward to getting my set and the sets for the 114h and Jigmaster. Thanks for coming through for us!   Bob
Logged

"Quemadmoeum gladuis neminem occidit, occidentis telum est." (A sword is never a killer, it is a tool in the killer's hands.)
   -    Lucius Annaeus Seneca, circa 4 BC – 65 AD
coonhound
Member
*
Offline Offline

Posts: 39


« Reply #7 on: March 21, 2013, 05:51:44 PM »

It's hard to tell for sure from the photos and the plating but the pinion on the right appearers to be cast.



You certainly do not see any machining- that's for sure!
Logged
CaptKev
Member
*
Offline Offline

Posts: 42


« Reply #8 on: November 08, 2013, 09:35:36 AM »

"grease on the carbon fiber drag washers if you prefer a smoother drag with less range"

I found this quote on the Ebay ad. So greasing the washers actually decreases the drag range? I'm going to buy some of these sets but was very curious about this statement. 
Logged
Ron Jones
Firearms Group
Member
**
Online Online

Posts: 3785


« Reply #9 on: November 08, 2013, 10:42:40 AM »

Several people have performed tests, including Tiburon engineering, that demonstrate that the addition of Teflon based drag grease to carbon fiber drag disks reduces the absolute maximum drag numbers. However, the grease dramatically increases the smoothness of the drag and, in my opinion, increases the usable range of drag for a specific instalation.

The decrease is expected when you realize that PTFE (Teflon) has a lower coeficient of drag than the woven carbon fiber used for drag disks.

Ron
Logged

Ronald Jones
To those who have gone to sea and returned and to those who have gone to sea and will never return
"
broschro
Guest
« Reply #10 on: November 08, 2013, 10:54:41 AM »

once you grease your Drags with Cals,you will never go back Wink
Logged
borchcl
Firearms Group
Member
**
Offline Offline

Posts: 283


« Reply #11 on: November 08, 2013, 02:51:40 PM »

Alan, The Ebay gears look like they have been tumbled in a cement mixer with some concrete blocks. My set is in transit. Thanks!
Charlie
Logged
Alto Mare
Moderator
Member
****
Offline Offline

Posts: 12478


Southeastern Pennsylvania


« Reply #12 on: November 08, 2013, 03:02:20 PM »

Several people have performed tests, including Tiburon engineering, that demonstrate that the addition of Teflon based drag grease to carbon fiber drag disks reduces the absolute maximum drag numbers. However, the grease dramatically increases the smoothness of the drag and, in my opinion, increases the usable range of drag for a specific instalation.

The decrease is expected when you realize that PTFE (Teflon) has a lower coeficient of drag than the woven carbon fiber used for drag disks.

Ron
Our boss told us about it a while back, he now has almost 100% using it here and backing him up....stick with Cal's on carbon washers Wink.
You've mentioned Tiburon, I don't get as excited as I used to when I hear Tiburon. Undecided
Sal
Logged

Forget about all the reasons why something may not work. You only need to find one good reason why it will.
Ron Jones
Firearms Group
Member
**
Online Online

Posts: 3785


« Reply #13 on: November 08, 2013, 03:29:06 PM »

I don't either necessarily, they are just the only manufacturer that has published some testing concerning greased CF drags.
Ron
Logged

Ronald Jones
To those who have gone to sea and returned and to those who have gone to sea and will never return
"
Dr. Jekyll - AKA MeL B
Member
*
Offline Offline

Posts: 1929



« Reply #14 on: November 10, 2013, 01:28:21 PM »

greasing is the way, the only way. now let me go back to the gears from ebay and black pearl. i bought the ebay one's before BP's because they were available first but i prefer BP's because of quality fit etc...btw never anybody interested in buying my ebay ones. Grin Grin Grin Grin
« Last Edit: November 10, 2013, 01:29:23 PM by Mel B » Logged
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.215 seconds with 16 queries.