Penn senator gear grind

Started by Bruhhh, September 17, 2024, 02:14:02 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2 3 4
User actions

Bruhhh

September 17, 2024, 02:14:02 AM
I recently took apart a 12/0 senator just to oil and re grease everything when I put it back together the gears are grinding and it looks like the main gear is digging into the housing of the reel. this reel didn't have any issues before I took it apart I've try putting it back togeather 4 times now still same issue and I'm pretty confident that I have everything we're it needs to be.can any one Help me fix this issue?

oldmanjoe

#1
September 17, 2024, 02:41:19 AM
If you have the main gear rubbing the housing , something is out of order.  Can you take pictures and post them .  It will help to walk you through and get it rite again .
Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
Character is doing the right thing when nobody is looking .   There are too many people who think that the only thing that!s right is to get by,and the only thing that's wrong is to get caught .
The power of Observation   , It`s all about the Details ..
" Life " It`s a thinking man`s game
" I cannot teach anybody anything   I can only make them think "     - Socrates-
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare

Donnyboat

#2
September 17, 2024, 03:40:27 AM
I would say your eccentric jack or pinion yoke are upside down, or back d front, dig up any senator schematics, there all the same n check it out, cheers don.
Don, or donnyboat

alantani

#3
September 17, 2024, 02:50:39 PM
it almost sounds like you have two drag washers under the main gear.   :-\
send me an email at alantani@yahoo.com for questions!

Bruhhh

#4
September 17, 2024, 02:51:57 PM
I can take it apart slowly and add pics along the way I hope this helps

Bruhhh

#5
September 17, 2024, 02:53:19 PM
I only have 1 fiber washer under the main gear

Gfish

#6
September 17, 2024, 03:01:53 PM
Great pictures. Nice progression. Does the main gear and(or)the gear sleeve wobble when it's all together?
Fishing tackle is an art form and all fish caught on the right tackle are"Gfish"!

Keta

#7
September 17, 2024, 03:43:48 PM
Try centering the main gear when tightening the bridge screws. Sometimes there is excessive slop and the gear hits the side plate.
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

oldmanjoe

#8
September 17, 2024, 11:29:52 PM
  You can go easy on the grease .  For some reason the ratch looks upside down to me .  All else look good .
Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
Character is doing the right thing when nobody is looking .   There are too many people who think that the only thing that!s right is to get by,and the only thing that's wrong is to get caught .
The power of Observation   , It`s all about the Details ..
" Life " It`s a thinking man`s game
" I cannot teach anybody anything   I can only make them think "     - Socrates-
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare

Bruhhh

#9
September 18, 2024, 02:50:55 AM Last Edit: September 18, 2024, 02:53:50 AM by Bruhhh
The main gear has a little side to side play would that effect it? The sleeve has some up down because of the pin holding it in but no side to side play. How do I center the main gear better I thought when I put those 4 screws in it will sort of center it self because I won't be able to start threading them on if it wasn't center?

Bruhhh

#10
September 18, 2024, 03:04:38 AM
What part is the ratch? I can't find it on the schematic.

Keta

#11
September 18, 2024, 03:28:35 AM
There occasionally is a bit of play in the holes.  I eyeball it from the outside on the open drag side plates.
Hi, my name is Lee and I have a fishing gear problem.

I have all of the answers, yup, no, maybe.

A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain

oldmanjoe

#12
September 18, 2024, 03:30:51 AM
That part with the # 15 116  . Was the anti reverse working when you reassemble it , they can be a pain at times .
Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
Character is doing the right thing when nobody is looking .   There are too many people who think that the only thing that!s right is to get by,and the only thing that's wrong is to get caught .
The power of Observation   , It`s all about the Details ..
" Life " It`s a thinking man`s game
" I cannot teach anybody anything   I can only make them think "     - Socrates-
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare

Bruhhh

#13
September 18, 2024, 03:47:03 AM
I put the whole reel back together again still grinds in gear and it also grinds in free spool too

Bruhhh

#14
September 18, 2024, 04:39:59 AM
Yup the anti reverse works as normal
Print
Go Up Pages1 2 3 4
User actions