Heavy vibration and grinding when reeling

Started by Tom McKinney, April 04, 2015, 01:04:18 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tom McKinney

Update:

While I haven't fished it yet, the matched set from Cone has made a big difference.  I had no idea that mixing used gears and pinions could could be a problem.  Always learning in this site.

Thanks Cone.  And to all who gave advice.

foakes

#16
When I have assembled reels from old parts -- many times the gears just will not quiet, or mesh properly -- until I switch them out with others.  But visually, I can see no problems.

Just like wearing someone else's pair of old shoes -- never feels or fits right.  Your feet and style of walking are different from anyone else.

That is why you will observe in many of the older quality reels -- the engineers generally used a steel pinion, along with a brass main.  They were allowing the dissimilar metals to be quieter and smoother when meshing -- by knowing the main would wear out sooner and slightly under typical usage.  And of course, it would perform more smoothly and quietly.

And sometimes a yoke is either tweaked enough or rough around the edges -- that a switch-out there will help also -- then when you get it where you are satisfied -- don't over slop grease on the drive train -- but a little extra would not hurt anything -- particularly when using old used parts.

Under actual fishing pressure -- everything needs to be looked at in the drive train -- bearings, gears, yoke, jack, pinion bearing axle, spool ends -- and even potential frame/stand/post twist causing alignment issues when meshing together.

Sounds like you made good progress with everyone's input.

Best,

Fred
The Official, Un-Authorized Service and Restoration Center for quality vintage spinning reels.

D-A-M Quick, Penn, Mitchell, and ABU/Zebco Cardinals

--------

The first rule of fishing is to fish where the fish are. The second rule of fishing is to never forget the first rule.

"Enjoy the little things in Life — For someday, you may look back — and realize that they were the big things"
                                                     Fred O.