Reel Repair by Alan Tani

Quote from: swill88 on June 30, 2015, 10:29:36 AM

Quote from: Tightlines666 on June 29, 2015, 08:35:09 PM
Nice!

Have you considered having someone produce a small run of these and offering them up for sale?  I think there is definately a market for spooling machines that don't require tapping into one's home equity line of credit.

Just a thought.

a really good thought!

Thanks guys. Actually it's not too hard to create and there are some already on the market similar to this already. The main thing is the drill holder and the spooler. The spooler can be bought for a little over a $130 and the rest can be made if you have some basic tools and keep an eye out for aluminum scrap sales. Trust me, if I can make this anyone can.

Quote from: Tiddlerbasher on June 30, 2015, 10:10:28 AM
Lovely job How difficult was the anodising? I keep meaning to try it as I have a lot of aluminium projects.

When I built my line winder I used a variable speed 36v dc e-bike motor. To up the torque and lower the revs (180rpm final) i used small timing pulleys - Can wind with 20lb of drag if necessary. In practice 8-10lb of drag is all you will need for braid. To get the drag I used a lever drag principal - very consistant. The level wind was a re-cycled sic rod tip - keeps the hand away from the moving bits

That is slick. I'm curious about the lever drag mechanism. Do you have anymore pics with how it's setup? I'll be honest, I'm looking to see if I can steal it and  recreate it for fun

The anodizing was easier than I thought. Cleanliness on your part is a huge factor and taking the time to figure the surface area really helps takes the guesswork out. I wrote a little guide about it a little while back in case anyone wanted to see how I went about it. It's probably got some gaps but gives an idea of the general process for home use. Part 1 deals with supplies and general setup. Part 2 has the formulas and a link to a calculator you can use to get the time and amperage you need to run the parts for.

Part 1 http://shinyinsanity.com/aluminum-anodizing-part-1/

Part 2 http://shinyinsanity.com/aluminum-anodizing-part-2/

That is a great machine Feeder!! Just thinking things like this would make great Kitsets Using a combination of manufactured and available parts. Lots of people have some but not all of the skills to produce a beast like that . Well done and I love the anodising Great Job!
Best Jon

Feeder - You can find a description here on the 2nd page

http://alantani.com/index.php?topic=11452.0

Quote from: jonnou on July 01, 2015, 05:34:17 AM
That is a great machine Feeder!! Just thinking things like this would make great Kitsets Using a combination of manufactured and available parts. Lots of people have some but not all of the skills to produce a beast like that . Well done and I love the anodising Great Job!
Best Jon

Thank a lot Jon. I appreciate it.  The most tedious part was all the drilling without a drill press. It just takes some time and patience but I believe a lot of people could do this.

Quote from: Tiddlerbasher on July 01, 2015, 09:10:55 AM
Feeder - You can find a description here on the 2nd page

http://alantani.com/index.php?topic=11452.0

Thanks. That is very creative and well designed.

Wow impressive talent and work. After looking around on this site a bit, I decided to make my own IAR bearing remover/installer tool with the end of rv propane tank connector, took big plastic hand nut off and removed hose and thought this will work it was strait shaft with mushroom head on it with barbed end to go in hose. Will use drill press as lathe to cut it and use drill press for arbor press to remove bearings. Used file for cutting tooth and it worked really well I might add. Took about 1/2 hour to make it.

Very ingenious, DD.

Best,

Fred

Sweet - good idea.
Do you get enough grunt, from a drill press, to shift an Ambassador AR bearing?
I found I needed an arbor press (with an appropriately sized socket).

Quote from: Tiddlerbasher on September 16, 2015, 03:40:00 PM
Sweet - good idea.
Do you get enough grunt, from a drill press, to shift an Ambassador AR bearing?
I found I needed an arbor press (with an appropriately sized socket).


[Tiddler yes there was enough to punch it out no problem but I was shocked at how much force it took to push a tiny bearing out like that. I did use a 9/16 socket on the out side it sat on the second ring nice and tight.]

Yep them suckers can be reel tight 

Heres my homemade red neck rod holder for the pontoon boat it holds 8 rods in a circle pattern its ugly but it works and in the middle I keep my telescopic aluminum pole with hook slid down the center post from the top. I also have a shreks head off a shrek doll to cover the center post when pole hook not in center. Grandkids love the shrek head ahaha.

forget the rod holder, I really like the floatation tubes/devices on the rods, what did you used?



I see a money saver on them, I was about to lost my trini16 few years ago when I have the rod on my hands and leave it for 3 seconds to take something on the boat, fish took the lure and took my rod for a dive, well almost did it, my at friend at the end of the panga was fast enough to take the rod when it was on it way to the deep sea.

Sorry ,  Harry I couldnt view any pictures from this post,   says no 3rd party hosting.   Hope your doing well up there!!

Quote from: spize909 on August 18, 2013, 09:18:49 PM
Well, this is what we ended up with. I got my old 1/2 drill out and clamped her onto a piece of 3/4x3/4 with a big u-bolt. I scored the case a little and put some JB type stuff on it to just feel a little more secore about it sliding out.
I did a couple reels, it worked well but started melting the plastic on the 1/4 lb spool. I fixed that with some different washers.

and the other motor clamps in the bench vise to still strip line.

Couple more.......



I kind of like the little stripper attachment more than the winder. It would work in a cordless too.

Stuff is still all working as designed........hard to get enough tension to do braid though. I can't put a hand on the spool, control the drill and put the line on straight all at the same time.