Top and bottom Delrin on a 114H

[Tightlines667]

I wonder if solid Delron top hats would be a good option...just a thought.  Might be better to 'keep it simple stupid'?

[Alto Mare]

Ha ha! Ok I'll change the e to an a, how's that?
It appears that it didn't confuse many, and that's a good thing.
Hey, I speak a little Spanish, I know how to break reels and I'm fluent in Italian. How much more do I need to know, I should be able to get away with a misspelled word every now and then.
Thanks for pointing that out comba', I appreciate it.
By the way, I'm sending you a piece of delrin, do you need me to make the washers or are you able to cut your own? Just in case I need to make them, let me know for which reel.

[Dominick]

I told you I need top and bottom for the tank.  You remember the tank I hope.  If not go here http://alantani.com/index.php?topic=3083.0    Dominick

[Wolli]

DuPont manufactures more than thirty grades of Delrin.
Which one du u use for washers?

[Alto Mare]

Here you go:
http://www.mcmaster.com/#2638T24

[wallacewt]

haha
if not go here haha
good one dom!

[Dominick]

haha
if not go here haha
good one dom!

Wallace, I am glad you enjoyed that.  It's good to see my humor (humour)    appreciated.  Dominick

[Shark Hunter]

Alright,
I'm probably going to regret this, but I don't get it?
Also, what is the typo? I don't get that either. Easy on the Big Words Dominick.

[redsetta]

It's good to see my humor (humour) appreciated.

Your excellent spelling is also appreciated Dominick

[jonnou]

Daron
Delrin
Derlin
Darlin


Jaws anniversary Today Mr Shark
DA DA    DA    DA   DA DA DA DA 

[Shark Hunter]

 

[jonnou]

Have found a source for 1.0mm sheet here in New Zealand will this be ok or too thick?

[wallacewt]

hi jonnou
look for tight weave and laminated
easiest answer is to measure the thickness of the ones you are replacing
thats the safest way,but not necessarly the best
depends on the reel
cheers

[Shark Hunter]

Stock Penn HT-100's are around 1.30. I use 1.20 in all my reels, including the 114H. You could probably get away with using 1.0, but you are going to have to take up that extra space. A Six stack maybe.

[Keta]

Have found a source for 1.0mm sheet here in New Zealand will this be ok or too thick?

Delrin?  1.0mm=.039", that will work for under washers.